Vertex/Magneto spark plug wires?

Tech questions that don't fit above forums

Moderator: Team

Post Reply
jd956
New Member
New Member
Posts: 31
Joined: Thu Aug 19, 2010 1:18 pm
Location: South Texas

Vertex/Magneto spark plug wires?

Post by jd956 »

Hello, what msd or mallory spark plug wires do you recommend for a Vertex mag? What part numbers if possible?
Thanks
J.D
Moparious Maximus
Member
Member
Posts: 131
Joined: Fri Dec 04, 2009 12:12 pm
Location:

Re: Vertex/Magneto spark plug wires?

Post by Moparious Maximus »

Any wire that is (solid cored) will work fine. I dont know if MSD or Mallory makes a solid wire that will fit in the vertex cap, I know they do for the big promag 44's

We have used Moroso and Taylor, Taylor and Vertex are one and the same.
1963 Plymouth S/FX, 3215lbs, straight axle, best time 7.99 @ 170mph

572" mopar wedge, 8-71 @ 28% over on alky, glide, dana 60, 31.25X12 slicks.

http://www.youtube.com/watch?v=vq-xzFWHtFk&NR=1
jd956
New Member
New Member
Posts: 31
Joined: Thu Aug 19, 2010 1:18 pm
Location: South Texas

Re: Vertex/Magneto spark plug wires?

Post by jd956 »

Will solid core wires affect Nitrous solenoids?
J.D
Moparious Maximus
Member
Member
Posts: 131
Joined: Fri Dec 04, 2009 12:12 pm
Location:

Re: Vertex/Magneto spark plug wires?

Post by Moparious Maximus »

They shouldnt effect the soleniods directly, but maybe the controller. I'm not a N02 guy so I cant say for sure.
1963 Plymouth S/FX, 3215lbs, straight axle, best time 7.99 @ 170mph

572" mopar wedge, 8-71 @ 28% over on alky, glide, dana 60, 31.25X12 slicks.

http://www.youtube.com/watch?v=vq-xzFWHtFk&NR=1
Post Reply