Siemens / Edelbrock injector flow?

Tech questions that don't fit above forums

Moderator: Team

Post Reply
User avatar
SWR
Guru
Guru
Posts: 2791
Joined: Sun Jan 29, 2006 5:39 pm
Location: Norway
Contact:

Siemens / Edelbrock injector flow?

Post by SWR »

A friend have bought himself a set of some Siemens Deka injectors, marked Edelbrock, allegedly they should be good for 500+ hp in an I4 Turbo engine. The number on them are 3528/4197q08832. Can't seem to find anything about them, not even on Edelbrock's pages. Anyone have an idea of their flow at 43.5 psi?
-Bjørn

"Impossible? Nah...just needs more development time"
jacksoni
Guru
Guru
Posts: 1074
Joined: Sat Dec 18, 2004 2:54 pm
Location: Maryland

Re: Siemens / Edelbrock injector flow?

Post by jacksoni »

I found this- if real answers your question but also didn't find much else though if you search the new number you get some hits.

http://forums.edelbrock.com/forums/show ... php?t=3131
User avatar
SWR
Guru
Guru
Posts: 2791
Joined: Sun Jan 29, 2006 5:39 pm
Location: Norway
Contact:

Re: Siemens / Edelbrock injector flow?

Post by SWR »

jacksoni wrote:I found this- if real answers your question but also didn't find much else though if you search the new number you get some hits.

http://forums.edelbrock.com/forums/show ... php?t=3131
Yes, thanks. I signed on there and got a reply myself the other day.. :)
-Bjørn

"Impossible? Nah...just needs more development time"
Post Reply