looking for info on a new c b n style head mill what would be the best bang for the buck
thanks guys
head mill
Moderator: Team
-
- Member
- Posts: 96
- Joined: Fri Apr 06, 2007 4:59 pm
- Location: St. Charles, MO
- Contact:
-
- Member
- Posts: 129
- Joined: Fri Jan 14, 2011 11:17 pm
- Location: Edmonton Alberta Canada
- Contact:
Re: head mill
The DCM/Sunnen stuff is very cool!!
Find a demo model or slightly used if possible.
Mm
Find a demo model or slightly used if possible.
Mm
Re: head mill
I have a DCM 3800 that I bought from DCM. Mine has a grinding head as well as a CBN cutter.
Re: head mill
T&S Machine. I have the TS3000. Very fast set up for heads and blocks. Has a 1/2 CBN puck. Will finish blocks and heads in the 4to 6 ra .
Re: head mill
X2 I have the same one and it is very fast and accurate.jed wrote:T&S Machine. I have the TS3000. Very fast set up for heads and blocks. Has a 1/2 CBN puck. Will finish blocks and heads in the 4to 6 ra .
Randy
http://www.youtube.com/watch?v=itIITBanJDs
http://www.harshmanauto.com
http://www.harshmanauto.com