head mill

winterhoff · Post by **winterhoff** » Fri Sep 16, 2011 2:58 pm

looking for info on a new c b n style head mill what would be the best bang for the buck
thanks guys

topfuelrocket · Post by **topfuelrocket** » Fri Sep 16, 2011 9:09 pm

Contact Rottler

Mmfh · Post by **Mmfh** » Tue Sep 27, 2011 12:47 am

The DCM/Sunnen stuff is very cool!!

Find a demo model or slightly used if possible.

Mm

TMSJoe · Post by **TMSJoe** » Wed Oct 26, 2011 9:49 pm

I have a DCM 3800 that I bought from DCM. Mine has a grinding head as well as a CBN cutter.

Post by **jed** » Wed Nov 02, 2011 11:20 am

T&S Machine. I have the TS3000. Very fast set up for heads and blocks. Has a 1/2 CBN puck. Will finish blocks and heads in the 4to 6 ra .

fastvette · Post by **fastvette** » Wed Nov 02, 2011 8:45 pm

jed wrote:T&S Machine. I have the TS3000. Very fast set up for heads and blocks. Has a 1/2 CBN puck. Will finish blocks and heads in the 4to 6 ra .

X2 I have the same one and it is very fast and accurate.

Randy

Don Terrill’s Speed-Talk