Cbn

Tech questions that don't fit above forums

Moderator: Team

mitch
Expert
Expert
Posts: 710
Joined: Fri May 11, 2012 8:38 am
Location:

Cbn

Post by mitch »

Where is the best place to get the .500 round cbn insert holders.
Thanks
jred
Expert
Expert
Posts: 505
Joined: Sun Jun 11, 2006 12:14 am
Location: tucson arizona
Contact:

Re: Cbn

Post by jred »

look in shop trader mag I bought some from the guy in tupalow miss I think they were about 90.00 each they worked good on my machine he has .375 and .500 single sided and double sided
mitch
Expert
Expert
Posts: 710
Joined: Fri May 11, 2012 8:38 am
Location:

Re: Cbn

Post by mitch »

Where can I find that magazine.Is it online?
Thanks
resurrectionjoe
Pro
Pro
Posts: 234
Joined: Fri Sep 26, 2008 12:00 am
Location: Northeastern PA

Re: Cbn

Post by resurrectionjoe »

jred is refering to this company.

Quality Cutter Grinding

1915 Elvis Presley Drive
Tupelo, MS 38804 - map
Phone: (662) 844-9102

I also have bought cbn inserts from him.
mitch
Expert
Expert
Posts: 710
Joined: Fri May 11, 2012 8:38 am
Location:

Re: Cbn

Post by mitch »

Do you know if they have holders too.
Thanks
resurrectionjoe
Pro
Pro
Posts: 234
Joined: Fri Sep 26, 2008 12:00 am
Location: Northeastern PA

Re: Cbn

Post by resurrectionjoe »

mitch wrote:Do you know if they have holders too.
Thanks
They did not have holders when I purchased my inserts.
PHANTASM
Member
Member
Posts: 120
Joined: Thu Aug 11, 2011 12:19 am
Location: minnesota

Re: Cbn

Post by PHANTASM »

I FOUND SOME FOR 5PCS WAS 140 SHIPPED TO MY DOOR. THEY WORK AWESOME.
I get a 12ra on aluminum and 17 on cast iron/steel
mitch
Expert
Expert
Posts: 710
Joined: Fri May 11, 2012 8:38 am
Location:

Re: Cbn

Post by mitch »

What holder do you have
Thanks Mitch
ShaunK
New Member
New Member
Posts: 33
Joined: Sun Aug 02, 2009 8:53 pm
Location: New Castle, PA

Re: Cbn

Post by ShaunK »

PHANTASM wrote:I FOUND SOME FOR 5PCS WAS 140 SHIPPED TO MY DOOR. THEY WORK AWESOME.
I get a 12ra on aluminum and 17 on cast iron/steel
Where did you find the holders?
PHANTASM
Member
Member
Posts: 120
Joined: Thu Aug 11, 2011 12:19 am
Location: minnesota

Re: Cbn

Post by PHANTASM »

I MADE MY OWN HOLDERS FOR A SM2000 VAN NORMAN RESURFACER. got rid of that stone and coolant mess. works very nice.
cost me about 45 for materials
mitch
Expert
Expert
Posts: 710
Joined: Fri May 11, 2012 8:38 am
Location:

Re: Cbn

Post by mitch »

Do you have any pictures that you could post
Thanks Mitch
PHANTASM
Member
Member
Posts: 120
Joined: Thu Aug 11, 2011 12:19 am
Location: minnesota

Re: Cbn

Post by PHANTASM »

pic
You do not have the required permissions to view the files attached to this post.
PHANTASM
Member
Member
Posts: 120
Joined: Thu Aug 11, 2011 12:19 am
Location: minnesota

Re: Cbn

Post by PHANTASM »

another
You do not have the required permissions to view the files attached to this post.
mitch
Expert
Expert
Posts: 710
Joined: Fri May 11, 2012 8:38 am
Location:

Re: Cbn

Post by mitch »

Does it bolt in place of where the stone went .Can you send a pic of the whole wheel
Thanks Mitch
user-3597028

Re: Cbn

Post by user-3597028 »

PHANTASM wrote:pic
Which direction does your SM 2000 cut?

Mine spins clockwise from the bottom and cuts right to left.
Post Reply