Time slip and dyno sheet don't match (need advice)
Moderator: Team
Time slip and dyno sheet don't match (need advice)
Is something wrong with my comb.
Motor made 574 hp and 572 tq on engine dyno. Motor is 418 sb mopar stroker motor. It is in a 72 challenger street car with stock rear suspension, 3.55 gear and a reworked converter from ptc roughly 3800 stall. A competition 727 from tci. Car weighs 3800 with me in it. The best time so far is 7:44 @91 mph in the 1/8. With a 26x10 slick on it. 60 ft times are 1.6. I am looking to try some caltracs on the rear but I just don't feel the mph matches the hp.
Motor made 574 hp and 572 tq on engine dyno. Motor is 418 sb mopar stroker motor. It is in a 72 challenger street car with stock rear suspension, 3.55 gear and a reworked converter from ptc roughly 3800 stall. A competition 727 from tci. Car weighs 3800 with me in it. The best time so far is 7:44 @91 mph in the 1/8. With a 26x10 slick on it. 60 ft times are 1.6. I am looking to try some caltracs on the rear but I just don't feel the mph matches the hp.
Re: Time slip and dyno sheet don't match (need advice)
I am new to this site is this the place to post such a question??????? Thanks
- Dave Koehler
- Vendor
- Posts: 7207
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: Time slip and dyno sheet don't match (need advice)
The more knowledgeable will chime in but the numbers they give you are corrected.
Are you running at sea level on a 60 degree day with no humidity? If so then I think you are missing some HP or there is an anchor in the car.
Are you running at sea level on a 60 degree day with no humidity? If so then I think you are missing some HP or there is an anchor in the car.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Re: Time slip and dyno sheet don't match (need advice)
Try this link from Stan Weiss, he has some formulas that help estimate horsepower.
http://users.erols.com/srweiss/calchpm8.htm
http://users.erols.com/srweiss/calchpm8.htm
Re: Time slip and dyno sheet don't match (need advice)
I ran the nmbers on that site and on wallace calculator and they both estimate about 410 to 425 hp at flywheel. Am i loosing that much power from stock suspension. Shouldnt my mph be up even if my times were slow??
- Dave Koehler
- Vendor
- Posts: 7207
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: Time slip and dyno sheet don't match (need advice)
I'll try this again. Check your UNcorrected HP numbers from that dyno sheet. Those are more realistic, particularly if your dyno and your dragstrip are in the same local area.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Re: Time slip and dyno sheet don't match (need advice)
Sorry, All I recieved was corrected numbers on my sheet,
-
- HotPass
- Posts: 9399
- Joined: Tue Nov 22, 2005 5:41 am
- Location:
Re: Time slip and dyno sheet don't match (need advice)
Josh, is your dyno in Philippi? You can look up the weather on the day you tested there or wherever the dyno is and try to calculate backwards to the uncorrected numbers. Check the elevation and weather at the track as well.Jdm1027 wrote:Sorry, All I recieved was corrected numbers on my sheet,
http://www.wunderground.com/weather-for ... lippi.html
https://www.semasan.com/breaking-news-archives?utm_campaign=DrivingForce_DF272&utm_content=SeeAllLeg
- thedynoguy
- Member
- Posts: 116
- Joined: Mon Jan 21, 2013 11:47 am
- Location: Webster, New York
Re: Time slip and dyno sheet don't match (need advice)
just call the dyno shop and get the uncorrected numbers...
- John Wallace
- Guru
- Posts: 1511
- Joined: Tue Jan 04, 2005 10:20 am
- Location: was Central Illinois - Now in Sunny Florida!
- Contact:
Re: Time slip and dyno sheet don't match (need advice)
I'd say your MPH matches the ET great. So does the 60'
Now the ET/MPH are for a 465/470 HP engine.
So, you're not using a 100HP somewhere.
Could be as these guys are saying is the weather/dyno numbers are making your HP numbers higher than what you raced at.
If you are at sea level in 70º calm weather when you ran those times, then you should be running faster.
(possibly 6.9's in 1/8th)
Now the ET/MPH are for a 465/470 HP engine.
So, you're not using a 100HP somewhere.
Could be as these guys are saying is the weather/dyno numbers are making your HP numbers higher than what you raced at.
If you are at sea level in 70º calm weather when you ran those times, then you should be running faster.
(possibly 6.9's in 1/8th)
John Wallace
Pontiac Power RULES !
www.wallaceracing.com
Pontiac Power RULES !
www.wallaceracing.com
Re: Time slip and dyno sheet don't match (need advice)
Did the shop that built the motor also dyno the motor ?
Re: Time slip and dyno sheet don't match (need advice)
Yes sir, I emailed them to get the uncorrected numbers but have not heard from them, He is the one telling me something is wrong with my comb and I should be turning better times. I just thought that with 3:55 in the 1/8 and stock suspension with old worn out air shocks that was what was hurting my times.
- Stan Weiss
- Vendor
- Posts: 4820
- Joined: Tue Feb 20, 2007 1:31 pm
- Location: Philadelphia, PA
- Contact:
Re: Time slip and dyno sheet don't match (need advice)
Can you post a copy of your dyno sheet?Jdm1027 wrote:Sorry, All I recieved was corrected numbers on my sheet,
Stan
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Re: Time slip and dyno sheet don't match (need advice)
You do not have the required permissions to view the files attached to this post.
- Stan Weiss
- Vendor
- Posts: 4820
- Joined: Tue Feb 20, 2007 1:31 pm
- Location: Philadelphia, PA
- Contact:
Re: Time slip and dyno sheet don't match (need advice)
That is the only information on your dyno sheet?Jdm1027 wrote:
Stan
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV