Thinking about selling whole shop... (Cylinder Heads)
Moderator: Team
Thinking about selling whole shop... (Cylinder Heads)
I went to the School of Automotive Machinists about 7-8 years ago and bought
Up this equipment to start a busniess just doing performance cylinder heads. I've gotten bored with
It and seeing if anyone is interested in all the equipment as a package deal.
2007 Sunnen DCM HMC 3000 cylinder head machining center.
All computerized with air floating table.
Does seat and guide work, surface heads, and with some added tooling
Surface and bore blocks.
Includes lots of tooling to do seat work on modular fords, LS, sbf, BBF, sbc, and most imports
2005 Superflow 600
Has berzinski fixture with several plates and bores
Flowcom
About 200-250 test valves of all sizes
IDL center valve grinder (just like a vr7000 sunnen)
And all my cylinder head porting equipment.
3 grinders (2 are pencil grinders like a jeweler would use the other
Is a Milwaukee)
About 50 burr bites
Cylinder head stands
Once again not looking to split this stuff up.
Package deal for everything $40k
Will entertain trades also...
Up this equipment to start a busniess just doing performance cylinder heads. I've gotten bored with
It and seeing if anyone is interested in all the equipment as a package deal.
2007 Sunnen DCM HMC 3000 cylinder head machining center.
All computerized with air floating table.
Does seat and guide work, surface heads, and with some added tooling
Surface and bore blocks.
Includes lots of tooling to do seat work on modular fords, LS, sbf, BBF, sbc, and most imports
2005 Superflow 600
Has berzinski fixture with several plates and bores
Flowcom
About 200-250 test valves of all sizes
IDL center valve grinder (just like a vr7000 sunnen)
And all my cylinder head porting equipment.
3 grinders (2 are pencil grinders like a jeweler would use the other
Is a Milwaukee)
About 50 burr bites
Cylinder head stands
Once again not looking to split this stuff up.
Package deal for everything $40k
Will entertain trades also...
Re: Thinking about selling whole shop... (Cylinder Heads)
Can you send pics of equipment to brian@orlandiperformance.com
Re: Thinking about selling whole shop... (Cylinder Heads)
Will get pics ASAP
Located near Fayetteville, AR
Located near Fayetteville, AR
Re: Thinking about selling whole shop... (Cylinder Heads)
Yes I sent you another emailBrian41 wrote:Still for sale ?
-
- Guru
- Posts: 2997
- Joined: Mon Jun 14, 2010 3:16 pm
- Location: Lake Elizabeth, CA
Re: Thinking about selling whole shop... (Cylinder Heads)
Probably get a better price and sell everything sooner if you just sell every individual item on ebay.
Joe Facciano
Re: Thinking about selling whole shop... (Cylinder Heads)
I'm sure your right, but I'm not paying eBay fees andJoePorting wrote:Probably get a better price and sell everything sooner if you just sell every individual item on ebay.
Don't want to deal with several different transactions.
(Don't have alot of free time on my hands to move the machines)
- nickmckinney
- Guru
- Posts: 1417
- Joined: Fri Aug 01, 2008 11:21 pm
- Location: Orlando
- Contact:
Re: Thinking about selling whole shop... (Cylinder Heads)
I gotta admit, I think Joe is right, thats a tough sell as a package IMHO especially considering the rarity of the Sunnen machine.JoePorting wrote:Probably get a better price and sell everything sooner if you just sell every individual item on ebay.
Re: Thinking about selling whole shop... (Cylinder Heads)
Lots of interest and offers.
I'm considering splitting it up.
You do not have the required permissions to view the files attached to this post.
Re: Thinking about selling whole shop... (Cylinder Heads)
I've had a lot of interest in spliting my machines
I will split them up once the sunnen machine is sold.
Price per machine are obo... Still listening to trade offers
(Drag cars, mustangs, ford lightning, guns, plasma table, etc)
Sunnen $28,000
Flow bench $7,000
IDL valve grinder $4,500
All my head porting tooling $500
I will split them up once the sunnen machine is sold.
Price per machine are obo... Still listening to trade offers
(Drag cars, mustangs, ford lightning, guns, plasma table, etc)
Sunnen $28,000
Flow bench $7,000
IDL valve grinder $4,500
All my head porting tooling $500
Re: Thinking about selling whole shop... (Cylinder Heads)
Still listening to offers and trades.
Have a local machine shop friend looking/interested in a vgs-20
so I might trade for one if someone has one.
Other things Im interested in
Bridgeports, Lathes, and attachments, crank polisher,
Snap on tool box/tools, ford diesel 4x4 trucks 05-up,
Car hauler 18ft, in ground chassis Dyno, etc...
Have a local machine shop friend looking/interested in a vgs-20
so I might trade for one if someone has one.
Other things Im interested in
Bridgeports, Lathes, and attachments, crank polisher,
Snap on tool box/tools, ford diesel 4x4 trucks 05-up,
Car hauler 18ft, in ground chassis Dyno, etc...
Re: Thinking about selling whole shop... (Cylinder Heads)
Price drop on sunnen machine. Really would like to move this stuff.
Re: Thinking about selling whole shop... (Cylinder Heads)
Sunnen $25,000
Flow bench $7,000
IDL valve grinder $4,500
All my head porting tooling $500
Flow bench $7,000
IDL valve grinder $4,500
All my head porting tooling $500