Thinking about selling whole shop... (Cylinder Heads)
Moderator: Team
Re: Thinking about selling whole shop... (Cylinder Heads)
Did you have a shop in Fayetteville? I'm surprised I don't recognize the equipment, thought I knew all of the shops in the area. There is a shop in the area with a older DCM, but I've never had the chance to use one.
Re: Thinking about selling whole shop... (Cylinder Heads)
No I was in Farmington but now live in Siloam Springsnoice wrote:Did you have a shop in Fayetteville? I'm surprised I don't recognize the equipment, thought I knew all of the shops in the area. There is a shop in the area with a older DCM, but I've never had the chance to use one.
Your more than welcome to come by the shop and see any of the machines in action.
Re: Thinking about selling whole shop... (Cylinder Heads)
How about 23K and a nice Bridgeport Series II (head assembly rebuilt with less than 5 hours use) with a vise, collet and holdown sets for the Sunnen and the IDL...... I deliver and pickup.
Re: Thinking about selling whole shop... (Cylinder Heads)
Brian pm sent (sorry for the late response)
TTT
Let's make a deal I'm ready to move this stuff.
Haven't used any of it in over a month.
TTT
Let's make a deal I'm ready to move this stuff.
Haven't used any of it in over a month.
Re: Thinking about selling whole shop... (Cylinder Heads)
As soon as the sunnen sells everything else will be sold separate.
Taking offers? Trades?
Like I've said before just not using them anymore with my new job, would rather have the room in the shop.
Taking offers? Trades?
Like I've said before just not using them anymore with my new job, would rather have the room in the shop.
-
- Guru
- Posts: 1037
- Joined: Sun Jul 05, 2015 6:01 pm
- Location:
Re: Thinking about selling whole shop... (Cylinder Heads)
Just curious how that dcm machine works. Cut accurate seats, surface finishes decent, etc. How is it for set up and changing over to surfacing from seats. Is it done on the same fixture, or is it a different fixture. And, lastly, is it supported at all? Like is the block stuff available still, or would it be a your on your own to find it. Its a cool machine. I remember seeing those when they came out and I said hmm. Being at pri last week, not really impressed with any of the seat and guide machines on the market. Thanks
Frank
Frank
Re: Thinking about selling whole shop... (Cylinder Heads)
It does cut seats very accurately (at as fast as a vgs20 but pretty close)
Surface finish is excellent and very easy to swap from surfacing to seat cutting. The swap the R8 cutter for the R8 seat cutter.
Surface and seat work done on the same fixture.
DCM does still support parts and they have a roll over fixture for the block. They quoted it for $2,000
Surface finish is excellent and very easy to swap from surfacing to seat cutting. The swap the R8 cutter for the R8 seat cutter.
Surface and seat work done on the same fixture.
DCM does still support parts and they have a roll over fixture for the block. They quoted it for $2,000
Re: Thinking about selling whole shop... (Cylinder Heads)
Tried of seeing this stuff sit in the shop.
Last price drop before I move it to a stroage container.
$35,000 takes it all
Or
$24,000 for sunnen machine
$6,500 for flow bench
$4,000 for valve grinder
$500 for porting equipment (wont sell this until the flow bench is sold)
Also if anyone is interested I have a 5x8 plasma table with hypertherm 45, touch screen computer, etc
$8,500 (can send pics if interested and can help train you to run it)
Last price drop before I move it to a stroage container.
$35,000 takes it all
Or
$24,000 for sunnen machine
$6,500 for flow bench
$4,000 for valve grinder
$500 for porting equipment (wont sell this until the flow bench is sold)
Also if anyone is interested I have a 5x8 plasma table with hypertherm 45, touch screen computer, etc
$8,500 (can send pics if interested and can help train you to run it)
Re: Thinking about selling whole shop... (Cylinder Heads)
Plasma table SOLD
Everything else is still for sale, willing to work a deal to move the machines.
Call/text 479-200-4806
Everything else is still for sale, willing to work a deal to move the machines.
Call/text 479-200-4806
Re: Thinking about selling whole shop... (Cylinder Heads)
This will be the last price drop....
Sunnen/DCM $22,000
Sunnen/DCM $22,000