SERDI 100 dial indicator holder
Moderator: Team
SERDI 100 dial indicator holder
Looking for the dial indicator holder that goes on the spindle of a Serdi 100 for tracking seat depth.
Like the one pictured, .. .. .. Serdi didn't have any
Like the one pictured, .. .. .. Serdi didn't have any
Race Flow Development
Simultaneous 5-axis CNC Porting
http://www.raceflowdevelopment.com
Simultaneous 5-axis CNC Porting
http://www.raceflowdevelopment.com
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: SERDI 100 dial indicator holder
You could try Jamison Equip. I think they have reproductions.
Should work the same as the original just less money.
Hope it helps
Dave
Should work the same as the original just less money.
Hope it helps
Dave
Real Race Cars Don't Have Doors
Re: SERDI 100 dial indicator holder
thanks Dave, .. didn't think to ask Jon
Race Flow Development
Simultaneous 5-axis CNC Porting
http://www.raceflowdevelopment.com
Simultaneous 5-axis CNC Porting
http://www.raceflowdevelopment.com
Re: SERDI 100 dial indicator holder
Can you use this? http://www.grizzly.com/products/Univers ... lder/G9629 Never seen or touched a Serdi so there may be some obvious reason why not, but it looks functionally similar from your picture. Grizzly just had a nice picture, but there are lots on ebay and www.mscdirect.com if you favor a particular brand.
Carl Ijames, chemist not engine builder
carl ddott ijames aatt verizon ddott net
carl ddott ijames aatt verizon ddott net
- Dave Koehler
- Vendor
- Posts: 7206
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: SERDI 100 dial indicator holder
Ijames,
I bought one of those things ....once. It is cheesy and flimsy. After an hour it hit the round file.
I bought one of those things ....once. It is cheesy and flimsy. After an hour it hit the round file.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Re: SERDI 100 dial indicator holder
That's what I was afraid of, but saw the picture and thought I'd mention it since I couldn't find any full circle holders. The cheap ones are $10, but msc has Fowler and Mitutoya brand holders with a test dial indicator for $130-150. I couldn't see enough detail in the pictures to know if they would be much stiffer or not.Dave Koehler wrote:Ijames,
I bought one of those things ....once. It is cheesy and flimsy. After an hour it hit the round file.
Carl Ijames, chemist not engine builder
carl ddott ijames aatt verizon ddott net
carl ddott ijames aatt verizon ddott net
Re: SERDI 100 dial indicator holder
Curtis,
I made my own out of a 1" piece of 3.5" ex tube, cut a section out so the diameter was correct and welded a couple of nuts so it would clamp onto the spindle, then welded a short piece of steel to the side so the dial could attach to it. took about 45 min to make, works like a bought one.
I made my own out of a 1" piece of 3.5" ex tube, cut a section out so the diameter was correct and welded a couple of nuts so it would clamp onto the spindle, then welded a short piece of steel to the side so the dial could attach to it. took about 45 min to make, works like a bought one.
Re: SERDI 100 dial indicator holder
do you have a photo by chance?smeg wrote:Curtis,
I made my own out of a 1" piece of 3.5" ex tube, cut a section out so the diameter was correct and welded a couple of nuts so it would clamp onto the spindle, then welded a short piece of steel to the side so the dial could attach to it. took about 45 min to make, works like a bought one.
seems completely insane to me that any company building seat machines doesn't have this critical
but simple required tool !!
Race Flow Development
Simultaneous 5-axis CNC Porting
http://www.raceflowdevelopment.com
Simultaneous 5-axis CNC Porting
http://www.raceflowdevelopment.com
Re: SERDI 100 dial indicator holder
I have taken a photo of it and (I will email it to you shortly Curtis, sorry, I don't know how to post pics here.
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: SERDI 100 dial indicator holder
Taylor Enterprises sells a copy with dial indicator for $125
He does nice work.
They for sale now on ebay
He does nice work.
They for sale now on ebay
Real Race Cars Don't Have Doors
Re: SERDI 100 dial indicator holder
The Taylor unit mounts on top of the spindle,
I do mostly canted valve heads and need to indicate off of the deck.
I made something myself,, I'll post a photo when I can.
Curtis
I do mostly canted valve heads and need to indicate off of the deck.
I made something myself,, I'll post a photo when I can.
Curtis
Race Flow Development
Simultaneous 5-axis CNC Porting
http://www.raceflowdevelopment.com
Simultaneous 5-axis CNC Porting
http://www.raceflowdevelopment.com
Re: SERDI 100 dial indicator holder
I'm looking for two myself. Has anyone had any luck locating these?
You do not have the required permissions to view the files attached to this post.
BMR @ Facebook
Re: SERDI 100 dial indicator holder
I'm considering having a couple made. If I attempt this would anyone else be interested in one themselves? Having a half dozen made vs two may be more cost effective.
BMR @ Facebook