Thinking about selling whole shop... (Cylinder Heads)

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

noice
Member
Member
Posts: 165
Joined: Mon Aug 30, 2010 12:34 pm
Location: NW Arkansas

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by noice »

Did you have a shop in Fayetteville? I'm surprised I don't recognize the equipment, thought I knew all of the shops in the area. There is a shop in the area with a older DCM, but I've never had the chance to use one.
JRice
Member
Member
Posts: 145
Joined: Mon Nov 05, 2012 11:14 pm
Location:

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice »

noice wrote:Did you have a shop in Fayetteville? I'm surprised I don't recognize the equipment, thought I knew all of the shops in the area. There is a shop in the area with a older DCM, but I've never had the chance to use one.
No I was in Farmington but now live in Siloam Springs
Your more than welcome to come by the shop and see any of the machines in action.
Brian41
New Member
New Member
Posts: 23
Joined: Fri Aug 28, 2009 2:15 pm
Location:

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by Brian41 »

How about 23K and a nice Bridgeport Series II (head assembly rebuilt with less than 5 hours use) with a vise, collet and holdown sets for the Sunnen and the IDL...... I deliver and pickup.
JRice
Member
Member
Posts: 145
Joined: Mon Nov 05, 2012 11:14 pm
Location:

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice »

Brian pm sent (sorry for the late response)
TTT
Let's make a deal I'm ready to move this stuff.
Haven't used any of it in over a month.
JRice
Member
Member
Posts: 145
Joined: Mon Nov 05, 2012 11:14 pm
Location:

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice »

As soon as the sunnen sells everything else will be sold separate.
Taking offers? Trades?
Like I've said before just not using them anymore with my new job, would rather have the room in the shop.
Frankshaft
Guru
Guru
Posts: 1037
Joined: Sun Jul 05, 2015 6:01 pm
Location:

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by Frankshaft »

Just curious how that dcm machine works. Cut accurate seats, surface finishes decent, etc. How is it for set up and changing over to surfacing from seats. Is it done on the same fixture, or is it a different fixture. And, lastly, is it supported at all? Like is the block stuff available still, or would it be a your on your own to find it. Its a cool machine. I remember seeing those when they came out and I said hmm. Being at pri last week, not really impressed with any of the seat and guide machines on the market. Thanks

Frank
JRice
Member
Member
Posts: 145
Joined: Mon Nov 05, 2012 11:14 pm
Location:

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice »

It does cut seats very accurately (at as fast as a vgs20 but pretty close)
Surface finish is excellent and very easy to swap from surfacing to seat cutting. The swap the R8 cutter for the R8 seat cutter.
Surface and seat work done on the same fixture.
DCM does still support parts and they have a roll over fixture for the block. They quoted it for $2,000
JRice
Member
Member
Posts: 145
Joined: Mon Nov 05, 2012 11:14 pm
Location:

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice »

Bump
JRice
Member
Member
Posts: 145
Joined: Mon Nov 05, 2012 11:14 pm
Location:

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice »

Tried of seeing this stuff sit in the shop.
Last price drop before I move it to a stroage container.

$35,000 takes it all
Or
$24,000 for sunnen machine
$6,500 for flow bench
$4,000 for valve grinder
$500 for porting equipment (wont sell this until the flow bench is sold)

Also if anyone is interested I have a 5x8 plasma table with hypertherm 45, touch screen computer, etc
$8,500 (can send pics if interested and can help train you to run it)
JRice
Member
Member
Posts: 145
Joined: Mon Nov 05, 2012 11:14 pm
Location:

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice »

Plasma table SOLD

Everything else is still for sale, willing to work a deal to move the machines.
Call/text 479-200-4806
JRice
Member
Member
Posts: 145
Joined: Mon Nov 05, 2012 11:14 pm
Location:

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice »

This will be the last price drop....
Sunnen/DCM $22,000
cv67
Guru
Guru
Posts: 1836
Joined: Fri Sep 05, 2008 11:39 pm
Location: Valencia Ca

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by cv67 »

sending a pm on hand pieces
JRice
Member
Member
Posts: 145
Joined: Mon Nov 05, 2012 11:14 pm
Location:

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice »

Equipment SOLD!
Post Reply