Sunnen "Sidewinder" honing mandrel driver

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
rce4csh
Pro
Pro
Posts: 202
Joined: Tue Feb 12, 2008 11:24 pm
Location:

Sunnen "Sidewinder" honing mandrel driver

Post by rce4csh »

Anyone here have a use for a Sunnen "Sidewinder" honing mandrel driver? Got one fifteen years old used once and then back into the plastic bag. Nice piece if you have need which I do not. will post a photo when my phone/camera gets back from repair. $500.00 and I pay the ride to the lower forty eight with insurance.
PackardV8
Guru
Guru
Posts: 7619
Joined: Sun Jul 30, 2006 2:03 pm
Location: Spokane, WA

Re: Sunnen "Sidewinder" honing mandrel driver

Post by PackardV8 »

This is the P-200 ?
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering
User avatar
Dave Koehler
Vendor
Posts: 7197
Joined: Mon Oct 04, 2004 11:19 pm
Location: Urbana, IL USA
Contact:

Re: Sunnen "Sidewinder" honing mandrel driver

Post by Dave Koehler »

What exactly does it bring to the party over the P180?
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
PackardV8
Guru
Guru
Posts: 7619
Joined: Sun Jul 30, 2006 2:03 pm
Location: Spokane, WA

Re: Sunnen "Sidewinder" honing mandrel driver

Post by PackardV8 »

The P 200 is designed to be used in a drill press with a 1/2" chuck where the P 180 is designed to be driven by a hand-held 3/8" drill motor. Slightly larger, slightly more stable.
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering
rce4csh
Pro
Pro
Posts: 202
Joined: Tue Feb 12, 2008 11:24 pm
Location:

Re: Sunnen "Sidewinder" honing mandrel driver

Post by rce4csh »

P-200? I will have to look it up and when my phone/camera arrives I will send ya a photo. I really do not remember the Sunnen number for it and it lived forever in a small tool box in it's original plastic bag on a shelf. The Sunnen box long time in the landfill. It is the the drill press or hand drill version that is designed to keep it from "wadding up" when honing larger or longer bores then the P-180 driver is comfortable with. I used it hone prop shaft bushings for a wastewater treatment plant one time following a line bore. Worked awesome.
Post Reply