WTB: Crank grinder

bubbabbc · Post by **bubbabbc** » Wed Mar 09, 2016 4:33 pm

Wanted: AMC-Schou 1100 to 1500 crankshaft grinder. Must be in good condition, I do not want to rebuild the machine. Berco 225 would also be a consideration. Call Mike @ (315) 695-2454 Thanks

PackardV8 · Post by **PackardV8** » Wed Mar 09, 2016 5:59 pm

Would you have any interest in a Storm-Vulcan Model 15 if it were complete, working condition and less than $10,000?

Alan Roehrich · Post by **Alan Roehrich** » Wed Mar 09, 2016 10:37 pm

Jack, whatcha got?

PackardV8 · Post by **PackardV8** » Thu Mar 10, 2016 11:54 am

Storm Vulcan 15A on centers/y-drive
Arnold gauge
Stone dresser
Five loaded hubs and two new stones
Radius dresser
Two steady rests
Fully tooled and operational.

$9995 delivered to your door. Alan.

Adger Smith · Post by **Adger Smith** » Wed Mar 23, 2016 6:27 am

I have a nice set of Chucks that will fit Jacks machine and replace the Y drivers. I also have a rebuilt drive motor.

Cummins Machinest · Post by **Cummins Machinest** » Wed Mar 23, 2016 11:05 am

Adger Smith wrote:I have a nice set of Chucks that will fit Jacks machine and replace the Y drivers. I also have a rebuilt drive motor.

how much?

Adger Smith · Post by **Adger Smith** » Wed Mar 23, 2016 12:03 pm

The rewired 3 phase drive motor & the chucks $500.

bubbabbc · Post by **bubbabbc** » Wed Mar 23, 2016 3:52 pm

The original post is all set, Mike found what he needs. But you guys can keep using the heading. Thanks

Skip

Don Terrill’s Speed-Talk

WTB: Crank grinder

WTB: Crank grinder

Re: WTB: Crank grinder

Re: WTB: Crank grinder

Re: WTB: Crank grinder

Re: WTB: Crank grinder

Re: WTB: Crank grinder

Re: WTB: Crank grinder

Re: WTB: Crank grinder