I have no need for it, but I figured some of you who are hungry enough will find this guy on facebook and hit him up.
Free 10" face mill for cast iron heads
Moderator: Team
-
- New Member
- Posts: 2
- Joined: Fri Apr 22, 2016 10:20 am
- Location:
Re: Free 10" face mill for cast iron heads
good morning im interested in the cutters im charlie and can be reach at 631-242=5665 thank you
-
- Guru
- Posts: 1597
- Joined: Mon Sep 21, 2009 11:58 pm
- Location: tenn
Re: Free 10" face mill for cast iron heads
As I do machine quite a bit of cast iron, I would be interested in the Mill head. I dont want to step in front of any one but if no one else needs it---.
reed
reed
- Dave Koehler
- Vendor
- Posts: 7206
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: Free 10" face mill for cast iron heads
I think it is gone. I went looking at FB and it no longer shows on his page in the date range...or I went blind.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
-
- Guru
- Posts: 1597
- Joined: Mon Sep 21, 2009 11:58 pm
- Location: tenn
Re: Free 10" face mill for cast iron heads
Dave Koehler wrote:I think it is gone. I went looking at FB and it no longer shows on his page in the date range...or I went blind.
Dave
We know the answer too that. HeHe.
reed