Interested in finding a good used Goodson Diamond Guide Hone setup or a P-180 that is no longer being used if you've stepped up to the diamond.
I am a part time, 1 man shop that only does HD heads so looking for 7mm, 5/16 & 3/8. 99.9% of the time the 7mm setup would be used so the changeover time isn't a big concern, only do a couple sets a month.
If you have a good setup for a fair price give me a call before I call Goodson later this week
Thanks
Chad
803-260-4657
WTB P-180 / Diamond Guide Hone
Moderator: Team
-
- New Member
- Posts: 12
- Joined: Fri Oct 23, 2015 2:32 pm
- Location:
Re: WTB P-180 / Diamond Guide Hone
Pete Graves
CPMotorworks,Inc.
Custom Engine Machining
Cylinder Head Fixture for Vertical / Surfacing Mills since 2008
CPMotorworks,Inc.
Custom Engine Machining
Cylinder Head Fixture for Vertical / Surfacing Mills since 2008
Re: WTB P-180 / Diamond Guide Hone
I need something like this to hone 5/8" Studebaker Champion lifter bores. What are the differences between the P180 and P190.
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering
Studebaker-Packard V8 Limited
Obsolete Engineering
-
- New Member
- Posts: 12
- Joined: Fri Oct 23, 2015 2:32 pm
- Location:
Re: WTB P-180 / Diamond Guide Hone
Nothing different, the P180 is just the head unit vs the P-190 is the kit with 4 different size stones