Valve covers
Moderator: Team
-
- Expert
- Posts: 576
- Joined: Tue Mar 08, 2005 3:57 pm
- Location: Hatboro PA
- Contact:
Valve covers
I know this is not the place for this but i need a set of sbc cast alumnium valve covers from an 18 deg engine either with the chevy logo or not with spring oilers for jesel shaft rockers no breathers can have spot for oil fill or bleed off valve.I need them for the hooters enging i,am building.
Mike Rogers
215-674-5240
EQ Cylinder Heads
http://www.rogersperformance.com
215-674-5240
EQ Cylinder Heads
http://www.rogersperformance.com
- Wolfplace
- Guru
- Posts: 3580
- Joined: Fri Sep 24, 2004 10:39 pm
- Location: Mendocino County, Northern CA
- Contact:
Re: Valve covers
=Mike Rogers wrote:I know this is not the place for this but i need a set of sbc cast alumnium valve covers from an 18 deg engine either with the chevy logo or not with spring oilers for jesel shaft rockers no breathers can have spot for oil fill or bleed off valve.I need them for the hooters enging i,am building.
Mike,
I think I've got a set.
email me & I will see if I can get a pic of them to you to see if they will work.
If I remember they had quick fasteners welded to them for header heat shields but I gotta look,,
Mike
Lewis Racing Engines
4axis CNC block machining
A few of the cars I have driven & owned
A tour of my shop
The Dyno
And a few pics of the gang
"Life is tough. Life is even tougher if you're stupid"
John Wayne
Lewis Racing Engines
4axis CNC block machining
A few of the cars I have driven & owned
A tour of my shop
The Dyno
And a few pics of the gang
"Life is tough. Life is even tougher if you're stupid"
John Wayne