Cam dynamics

Tech questions that don't fit above forums

Moderator: Team

Post Reply
vega1
New Member
New Member
Posts: 1
Joined: Wed Mar 08, 2017 2:53 pm

Cam dynamics

Post by vega1 » Thu Mar 09, 2017 9:06 am

I have 2 cams from cam dynamics, I am trying to identify the specs on them such as lift and other info., the numbers I have on the cams is 95F2A and 94D2A if someone can help I would appreciate it. Thank you vega1

Chipster
New Member
New Member
Posts: 34
Joined: Fri Feb 09, 2007 11:21 am
Location: Pitch Forks, ND

Re: Cam dynamics

Post by Chipster » Thu Mar 09, 2017 10:16 pm

Call Steve Huggins, Huggins Cams, Olive Branch MS 662-895-8482 he ran the shop at Cam Dynamics

Greenlight
Pro
Pro
Posts: 381
Joined: Wed Feb 16, 2005 10:37 pm

Re: Cam dynamics

Post by Greenlight » Sat May 06, 2017 12:11 am

I don't think those are camshaft part numbers/grind numbers.

I think those numbers identify the core and are probably "stamped" into the cam. The part number/grind number(s) are usually etched in, using an engraving type device.

Are there ANY other numbers, letters, etc.?
Project Greenlight

Post Reply