Wanting to trade camshaft(s)+$$ for Alum SBC heads

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
User avatar
CamKing
Guru
Guru
Posts: 8233
Joined: Wed Aug 08, 2007 4:05 pm
Location: Denver, NC
Contact:

Wanting to trade camshaft(s)+$$ for Alum SBC heads

Post by CamKing » Tue Aug 01, 2017 12:28 pm

I'm looking for a set of aluminum heads for my 350 SB Chevy. I'm only looking at making 400hp, and won't be turning it over 6,000rpm, so I don't need anything big. This will be going in a boat, but it won't see salt water, so that's not an issue.

Would like to trade a new custom cam(or 2) as partial payment.
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
(704)489-2449

ProPower engines
Guru
Guru
Posts: 6861
Joined: Sun Jan 21, 2007 1:16 pm
Location: VICTORIA BC CANADA

Re: Wanting to trade camshaft(s)+$$ for Alum SBC heads

Post by ProPower engines » Wed Aug 02, 2017 12:53 pm

Mike
Check out Speedway motors. They have a line of decent aluminum heads available that will work great for boat engines.
I have used several sets for lake boats on both 350 and 383 engines with great success. They make good power with the post sizes available decent quality valves etc. but they only come 64 cc which is not an issue if you don't have pistons yet.

May be worth a look

Dave C
Real Race Cars Don't Have Doors

User avatar
CamKing
Guru
Guru
Posts: 8233
Joined: Wed Aug 08, 2007 4:05 pm
Location: Denver, NC
Contact:

Re: Wanting to trade camshaft(s)+$$ for Alum SBC heads

Post by CamKing » Wed Aug 02, 2017 3:54 pm

I'll take a look.
Thanks
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
(704)489-2449

prairiehotrodder
Expert
Expert
Posts: 612
Joined: Sat Dec 24, 2011 10:02 am
Location: melfort saskatchewan Canada

Re: Wanting to trade camshaft(s)+$$ for Alum SBC heads

Post by prairiehotrodder » Thu Aug 03, 2017 10:48 am

in a slightly unrelated question. Are there any used cam cores that you look for or buy? I have a wrecking yard with about 150 vehicles.
Brian
The Word of God is quick and powerfull
www.therocketshop.blogspot.com

User avatar
CamKing
Guru
Guru
Posts: 8233
Joined: Wed Aug 08, 2007 4:05 pm
Location: Denver, NC
Contact:

Re: Wanting to trade camshaft(s)+$$ for Alum SBC heads

Post by CamKing » Fri Aug 04, 2017 10:50 am

prairiehotrodder wrote:in a slightly unrelated question. Are there any used cam cores that you look for or buy? I have a wrecking yard with about 150 vehicles.
Brian
The only used cams we regrind are for the GM 602,603, and 604 crate engines, but I doubt you'll find many of those.
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
(704)489-2449

enigma57
Guru
Guru
Posts: 1216
Joined: Sun Oct 07, 2007 11:59 pm
Location: Galt's Gulch

Re: Wanting to trade camshaft(s)+$$ for Alum SBC heads

Post by enigma57 » Mon Sep 25, 2017 2:36 am

PM sent, Mike.

HB

Post Reply