I have sent multiple msg. by email and PM on here I have no shipping info I need a address ?PHANTASM wrote:send me the tracking number if you have it. thanks
Tooling
Moderator: Team
-
- Member
- Posts: 126
- Joined: Sat Nov 19, 2011 6:19 am
- Location:
Re: Tooling
-
- Member
- Posts: 126
- Joined: Sat Nov 19, 2011 6:19 am
- Location:
Re: Tooling
If you want to just call me tomorrow at my shop that would be fine. Jim 530-892-1451 Thanks
-
- Member
- Posts: 126
- Joined: Sat Nov 19, 2011 6:19 am
- Location:
Re: Tooling
Ok will call you tomorrow and get everything set upputlove wrote:If you want to just call me tomorrow at my shop that would be fine. Jim 530-892-1451 Thanks
-
- Member
- Posts: 126
- Joined: Sat Nov 19, 2011 6:19 am
- Location:
-
- New Member
- Posts: 15
- Joined: Sat Feb 01, 2014 11:11 pm
- Location:
-
- Member
- Posts: 126
- Joined: Sat Nov 19, 2011 6:19 am
- Location:
-
- Member
- Posts: 126
- Joined: Sat Nov 19, 2011 6:19 am
- Location:
Re: Tooling
great I am glad you got it, took me a few days to get away from the shop.
Re: Tooling
Hi can you please tell me what tooling you have left. As my son is starting to get more involved with cylinder heads.
Best Regards Malcolm McC
Best Regards Malcolm McC
-
- Member
- Posts: 126
- Joined: Sat Nov 19, 2011 6:19 am
- Location:
Re: Tooling
I will have to look and see what I have I know I have the spiral valve guide tooling and a goodson pneumatic valve spring compressor , maybe some other items
Re: Tooling
Will the kwik way boring bar table work with a FN boring bar? You think it would be a good application for harley cylinders?
-
- Member
- Posts: 126
- Joined: Sat Nov 19, 2011 6:19 am
- Location: