I am looking for some prints for head bolt hole locations so i can machine a flow bench fixture with some locating holes. looking for LS, Mopar sb/bb,ford SB, FE,460, and pontiac.
Can anybody help me out?
My email is CREngines@gmail.com
Thank you.
Headbolt blueprints/cad files
Moderator: Team
- BigBlockMopar
- Momentary Specialist
- Posts: 336
- Joined: Fri Mar 25, 2016 8:53 pm
- Location: Netherlands
- Contact:
Re: Headbolt blueprints/cad files
I've once found this image made by Doty Man. for a BigBlock Mopar which I saved for when I decided to make a torque plate.
Not sure of accuracy, as the torque plate plan never got done.
I did make a vector-trace in Adobe illustrator at the time from a steel headgasket but never confirmed it as been accurate.
Not sure of accuracy, as the torque plate plan never got done.
I did make a vector-trace in Adobe illustrator at the time from a steel headgasket but never confirmed it as been accurate.
You do not have the required permissions to view the files attached to this post.
-
- Pro
- Posts: 287
- Joined: Wed Sep 03, 2014 2:01 am
- Location:
Re: Headbolt blueprints/cad files
Ford SB is pretty easy, everything is symmetric. 4.380" x 4.240" with the cylinders centered in the bolt pattern.
-
- Pro
- Posts: 287
- Joined: Wed Sep 03, 2014 2:01 am
- Location:
Re: Headbolt blueprints/cad files
LS is similar to the SBF, all symmetric 4.400" x 4.331". Bores are centered in the head bolt pattern.
Re: Headbolt blueprints/cad files
thank you. really need 460 and pontiac if any one has them handy...
-
- Pro
- Posts: 287
- Joined: Wed Sep 03, 2014 2:01 am
- Location:
Re: Headbolt blueprints/cad files
I will have the 460 info in a couple of days. Can't help you with the Pontiac.