NEW Pro-Filer SBC 23º Manifold
Moderator: Team
NEW Pro-Filer SBC 23º Manifold
I get many PM's on the new Pro-Filer SBC manifold so I thought I would post up a few pictures and rough lengths.
I have a few dyno tests lined out for some data.
Outside runner: 6.00
Inside runner: 5.50
Outside opening: 3.60
Inside opening: 3.30 and 3.10
I have a few dyno tests lined out for some data.
Outside runner: 6.00
Inside runner: 5.50
Outside opening: 3.60
Inside opening: 3.30 and 3.10
Re: NEW Pro-Filer SBC 23º Manifold
Nice looking piece.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST
631-816-4911
9:00am - 9:00pm EST
Re: NEW Pro-Filer SBC 23º Manifold
Damn it...why can't I see these pictures....just black boxes with an X.
-
- Guru
- Posts: 1597
- Joined: Mon Sep 21, 2009 11:58 pm
- Location: tenn
Re: NEW Pro-Filer SBC 23º Manifold
Are they available to the public yet? Profiler has nothing about them on their website yet. I'm looking at buying an intake for next year and was almost set to pull the trigger on a 300-25 and now this happens...
Re: NEW Pro-Filer SBC 23º Manifold
I searched for Wilson manifolds and Summit racing has them listed 495 dollars. Expensive, but if they are better out of the box than anything else available, Its cheaper than having something ported. Nothing against you head porters that are porting for a living...why not just start with the best. I will be watching this one for sure.
-
- Member
- Posts: 85
- Joined: Mon Feb 08, 2010 8:10 pm
- Location:
Re: NEW Pro-Filer SBC 23º Manifold
Are those locating pin holes on the flange? If so not a fan of the location.
Channel About My diy Projects & Reviews https://www.youtube.com/c/BOOTdiy
I know as much as I can learn and try to keep an open mind to anything!
If I didn't overthink stuff I wouldn't be on speedtalk!
I know as much as I can learn and try to keep an open mind to anything!
If I didn't overthink stuff I wouldn't be on speedtalk!
Re: NEW Pro-Filer SBC 23º Manifold
That intake is really well done in the plenum area....NICE JOB by Chad and the foundry very impressive work!
-
- Guru
- Posts: 1037
- Joined: Sun Jul 05, 2015 6:01 pm
- Location:
Re: NEW Pro-Filer SBC 23º Manifold
Could be wrong, but pretty sure Wilson Manifolds were who developed it. Its a nice looking piece though. The thing that always bugged me about profiler manifolds, is, their marketing has always been, performs like a ported manifold without the porting. But they are always 2 to 3 times more expensive. So, your actually paying for the porting for a cast manifold. But they still need porting.
Re: NEW Pro-Filer SBC 23º Manifold
I had nothing to do with this manifold. However the price point is in line especially if it performs vs plenum moded manifolds.
$424.24 SV2 Jegs
$313.95 300-110 Jegs
$309.87 2925 Jegs
The 2925 is perhaps the worst manifold out of the box ever made. The other two perform well oob.
I have tests lined out, if it doesn't perform I'll tell you.
$424.24 SV2 Jegs
$313.95 300-110 Jegs
$309.87 2925 Jegs
The 2925 is perhaps the worst manifold out of the box ever made. The other two perform well oob.
I have tests lined out, if it doesn't perform I'll tell you.
Last edited by user-9274568 on Wed Oct 25, 2017 10:28 am, edited 1 time in total.
-
- Pro
- Posts: 234
- Joined: Fri Sep 26, 2008 12:00 am
- Location: Northeastern PA
Re: NEW Pro-Filer SBC 23º Manifold
Chad I believe he's referring to these.
You do not have the required permissions to view the files attached to this post.