***Post Pics of what you are working on**

General engine tech -- Drag Racing to Circle Track

Moderator: Team

cgarb
Guru
Guru
Posts: 2006
Joined: Wed Jul 09, 2014 11:50 am
Location: Maryland

Re: ***Post Pics of what you are working on**

Post by cgarb »

My 355 I'm about to sell has the tall distributor boss...maybe I should think again about selling it. It has been a very good engine to me.
Turborick
Member
Member
Posts: 125
Joined: Sat Aug 29, 2009 10:43 pm
Location: Palmdale, Ca
Contact:

Re: ***Post Pics of what you are working on**

Post by Turborick »

rfoll wrote: Sun Oct 15, 2017 11:12 am
Turborick wrote: Sun Oct 15, 2017 1:04 am Hope to run it next week end

14567978_10211241240416662_2963183980247069396_n.jpg21761652_10214778109876188_1812262841439958557_n.jpg
Please post your results.
We set a class record of 263 miles an hour with our 256 inch turbo charge small block Chevy on gasoline this past weekend
4087E820-3528-4ACA-B0E2-BEA655FB86E5.jpeg
Here is a 360° video if you’re interested in looking at the run
https://youtu.be/WJCvhoXcPDo
You do not have the required permissions to view the files attached to this post.
Rick Yacoucci

Nebulous Theorem III.V
http://www.bonnevillestreamliner.com
User avatar
af2
Guru
Guru
Posts: 7014
Joined: Sun Jan 28, 2007 4:42 pm
Location: Grass Valley, CA :Northern Foothills

Re: ***Post Pics of what you are working on**

Post by af2 »

Turborick wrote: Mon Oct 23, 2017 9:46 pm
rfoll wrote: Sun Oct 15, 2017 11:12 am
Turborick wrote: Sun Oct 15, 2017 1:04 am Hope to run it next week end

14567978_10211241240416662_2963183980247069396_n.jpg21761652_10214778109876188_1812262841439958557_n.jpg
Please post your results.
We set a class record of 263 miles an hour with our 256 inch turbo charge small block Chevy on gasoline this past weekend
4087E820-3528-4ACA-B0E2-BEA655FB86E5.jpeg

Here is a 360° video if you’re interested in looking at the run
https://youtu.be/WJCvhoXcPDo
Very cool!!! Talk about coming on what sounded like 8000 and going to the moon....Nice!
GURU is only a name.
Adam
Casper393W
Pro
Pro
Posts: 422
Joined: Wed Jul 06, 2016 7:18 am
Location:

Re: ***Post Pics of what you are working on**

Post by Casper393W »

I unpacked my Howard's new solid Roller for my 393w over at David Vizards tonight. This is my first Howard's roller cam and let me tell you the polishing on this cam is better than most top name brands that I have seen! Stay tuned for more details of this David Vizard spec'ed Windsor build coming up!

Andy
You do not have the required permissions to view the files attached to this post.
vortecpro
Guru
Guru
Posts: 1767
Joined: Fri Apr 24, 2009 11:10 pm
Location:

Re: ***Post Pics of what you are working on**

Post by vortecpro »

The usual.
You do not have the required permissions to view the files attached to this post.
Racing a NA NHRA stocker should be mandatory before any posting.
Carnut1
Guru
Guru
Posts: 4659
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: ***Post Pics of what you are working on**

Post by Carnut1 »

1025171947a.jpg
Gearing up for my next thread. Sohc counterflow port design project. DV's flowbench program will be a big help in this project. I love a challenge so this will be fun. Thanks, Charlie
You do not have the required permissions to view the files attached to this post.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST
lewy-d
Member
Member
Posts: 122
Joined: Wed Sep 02, 2009 9:26 am
Location:

Re: ***Post Pics of what you are working on**

Post by lewy-d »

Charlie, are those VW heads? maybe mopar?
Carnut1
Guru
Guru
Posts: 4659
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: ***Post Pics of what you are working on**

Post by Carnut1 »

lewy-d wrote: Thu Oct 26, 2017 7:51 am Charlie, are those VW heads? maybe mopar?
VW Audi heads. Interesting German engineering.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST
stealth
Guru
Guru
Posts: 1391
Joined: Fri Jun 30, 2006 9:37 am
Location:

Re: ***Post Pics of what you are working on**

Post by stealth »

2 valve a Audi head?
Carnut1
Guru
Guru
Posts: 4659
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: ***Post Pics of what you are working on**

Post by Carnut1 »

stealth wrote: Sun Oct 29, 2017 12:58 pm 2 valve a Audi head?
Yes, 80' s vintage VW, Audi 8v counterflow head. Why? Why not? Small round ports that flow pretty good stock. Valves are a good size for the bore. I don't have all the specifics nailed down. I did one intake and exhaust to see if they would respond at all and gains can be had at least flow gains. Thanks, Charlie
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST
user-17438

Re: ***Post Pics of what you are working on**

Post by user-17438 »

Carnut1 wrote: Thu Oct 26, 2017 7:01 am 1025171947a.jpg Gearing up for my next thread. Sohc counterflow port design project. DV's flowbench program will be a big help in this project. I love a challenge so this will be fun. Thanks, Charlie
I'm not trying to discredit you or DV.. but how about you build something. Post your results, then modify it again to show your results. Vs show what a program will do. I have used pipemax to find out an engine wanted different frombwhatbwas suggested . Try things. I don't post much but nit doesn't mean I don't know much.

I can tell you there are simple formulas you can apply based on real world data, if you build and dyno/race stuff. but a dyno mule rarely wins an event. So who cares what that data is. Learn what can be done with a casring. It is what it is. That's why we have aftermarket castings. Because stock can't be modified enough.
Carnut1
Guru
Guru
Posts: 4659
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: ***Post Pics of what you are working on**

Post by Carnut1 »

MT, stay tuned. In the works, VW Audi counterflow head and possible extension of that project, 427-440 ci Chevelle engine project, 331 chevy street mill with ported vette 128 heads, for a friend build from what I have laying around and finally getting those Dart 200's done and on a motor. Brand new ported gt40p heads that may need to be turned into cash for Christmas. Now I realize that doesn't sound like much to you pros but this is my "Passion" and not my full time gig. Last set of heads have been sent to DV for his final testing and parts selection and dyno comp between 7 sets of sbf heads coming up. Not bad for a side gig, right?
I will be using DV's porting program to help guide port size and port energy with air velocity on the VW head it should be interesting and the reason I post as much as I do I sometimes I get fantastic help from pros. Thanks, Charlie
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST
Steve.k
Guru
Guru
Posts: 1562
Joined: Sat May 28, 2016 10:41 am
Location:

Re: ***Post Pics of what you are working on**

Post by Steve.k »

IMG_2021.JPG
436 ford(400 base) with chi 4v heads. Old School ur19 and a pair of 6464's. See if that livens it up.
You do not have the required permissions to view the files attached to this post.
User avatar
af2
Guru
Guru
Posts: 7014
Joined: Sun Jan 28, 2007 4:42 pm
Location: Grass Valley, CA :Northern Foothills

Re: ***Post Pics of what you are working on**

Post by af2 »

last yearImage at 10.00
And now at 9.50.Image
12973470_1744559935788789_3029390275521569412_o.jpg
You do not have the required permissions to view the files attached to this post.
GURU is only a name.
Adam
David Vizard
Guru
Guru
Posts: 1787
Joined: Thu Jan 15, 2015 12:19 pm
Location:

Re: ***Post Pics of what you are working on**

Post by David Vizard »

I have just got involved with a build my crew chief buddy Mervyn Bonnett is doing. It is one of those mopre desirable situations which has a reletivly big budget. How about a 470 SBC build intended to run alky and nitrous?

I am currently doing the heads for this build - a set of 18 degree GM castings.

Here is where I have got to so far.

The valve train will have about 0.800 lift max rpm will be about 7500 (needs to be reliable) flow #'s at that lift are 367 intake and 258 ex (no pipe)

DV
You do not have the required permissions to view the files attached to this post.
David Vizard Small Group Performance Seminars - held about every 2 months. My shop or yours. Contact for seminar deails - davidvizardseminar@gmail.com for details.
Post Reply