RPM generator for dyno

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
Racer18
Pro
Pro
Posts: 379
Joined: Wed Jul 04, 2007 12:42 pm
Location: Indiana
Contact:

RPM generator for dyno

Post by Racer18 »

I recently bought Land and Sea daq for my Stuska dyno, and would like to use the rpm signal generator from Stuska. Neither company knows how to wire it into the harness :roll: , and I dont want to damage anything by connecting the wrong wires. Anyone here have any experience with this setup? I have the wiring diagram for the harness, butt is like reading chinese.
DaveMcLain
Guru
Guru
Posts: 2858
Joined: Thu Jan 06, 2011 8:57 am
Location:

Re: RPM generator for dyno

Post by DaveMcLain »

Normally the Land and Sea uses a pickup with a flying magnet mounted in the absorber rotor. It can also use an RPM signal from points, an inductive pickup hooked to a wire or an MSD box. How does the circuit work on the Stuska?
Racer18
Pro
Pro
Posts: 379
Joined: Wed Jul 04, 2007 12:42 pm
Location: Indiana
Contact:

Re: RPM generator for dyno

Post by Racer18 »

It just plugs into the computer, into rpm 1 on the stuska
Post Reply