Ported Ford 289 heads with port energy discussion

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
RevTheory
Guru
Guru
Posts: 4982
Joined: Thu Sep 04, 2014 6:45 am

Re: Ported Ford 289 heads with port energy discussion

Post by RevTheory » Sat Jun 16, 2018 12:09 pm

Carnut1 wrote:
Sat Jun 16, 2018 11:12 am
If you think I am a blind follower or easily bullshitted you have no idea who I am. Thanks, Charlie
Let it go, Charlie. He's only here to stir up shit and bash David. Those of us that know David know better.

Carnut1
Guru
Guru
Posts: 3923
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: Ported Ford 289 heads with port energy discussion

Post by Carnut1 » Sat Jun 16, 2018 12:34 pm

IMG_7595.jpg
No worries Rev, still waiting to see some of his work. This is 45 minutes of work with an EQ vortec I did at DV's shop for a flowbench, iop program demo. Put up or cap it. Charlie
You do not have the required permissions to view the files attached to this post.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

RevTheory
Guru
Guru
Posts: 4982
Joined: Thu Sep 04, 2014 6:45 am

Re: Ported Ford 289 heads with port energy discussion

Post by RevTheory » Sat Jun 16, 2018 12:36 pm

Damn, Charlie, I've sure enjoyed watching your work progress over the last few years and it's quite impressive. =D>

Edit: Is this what Marvin had on Facebook the last week or so?

Carnut1
Guru
Guru
Posts: 3923
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: Ported Ford 289 heads with port energy discussion

Post by Carnut1 » Sat Jun 16, 2018 12:51 pm

Yes, Marvin did the flowbench and photography work. Thanks, Charlie
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

Warp Speed
Guru
Guru
Posts: 2693
Joined: Wed Jun 25, 2008 1:46 pm
Location: NC

Re: Ported Ford 289 heads with port energy discussion

Post by Warp Speed » Sat Jun 16, 2018 1:48 pm

Awesome, but when is ANY of your stuff that you post, actually gonna run?

CGT
Guru
Guru
Posts: 1390
Joined: Sun May 10, 2009 12:29 pm

Re: Ported Ford 289 heads with port energy discussion

Post by CGT » Sat Jun 16, 2018 1:51 pm

Warp Speed wrote:
Sat Jun 16, 2018 1:48 pm
Awesome, but when is ANY of your stuff that you post, actually gonna run?
Ill go with never.
"How or Y do you think I get all this $hit, I read all of you all builds and desktop dyno them with all the correct info and I've got your build."

Carnut1
Guru
Guru
Posts: 3923
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: Ported Ford 289 heads with port energy discussion

Post by Carnut1 » Sat Jun 16, 2018 1:52 pm

I know Warp, so frustrating for me also. Life is so in the way of hot rodding! I need to set goals and get there.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

user-30563

Re: Ported Ford 289 heads with port energy discussion

Post by user-30563 » Sat Jun 16, 2018 1:59 pm

Carnut1, did Vizard do anything with the Pro-Filer Ford? Curious, we have a couple sets here.

Carnut1
Guru
Guru
Posts: 3923
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: Ported Ford 289 heads with port energy discussion

Post by Carnut1 » Sat Jun 16, 2018 2:05 pm

portinguy wrote:
Sat Jun 16, 2018 1:59 pm
Carnut1, did Vizard do anything with the Pro-Filer Ford? Curious, we have a couple sets here.
I am not sure which Profiler you are asking about.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

user-30563

Re: Ported Ford 289 heads with port energy discussion

Post by user-30563 » Sat Jun 16, 2018 2:10 pm

Carnut1 wrote:
Sat Jun 16, 2018 2:05 pm
portinguy wrote:
Sat Jun 16, 2018 1:59 pm
Carnut1, did Vizard do anything with the Pro-Filer Ford? Curious, we have a couple sets here.
I am not sure which Profiler you are asking about.
The 205cc Ford

https://www.profilerperformance.com/222 ... heads.html

Carnut1
Guru
Guru
Posts: 3923
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: Ported Ford 289 heads with port energy discussion

Post by Carnut1 » Sat Jun 16, 2018 2:15 pm

portinguy wrote:
Sat Jun 16, 2018 2:10 pm
Carnut1 wrote:
Sat Jun 16, 2018 2:05 pm
portinguy wrote:
Sat Jun 16, 2018 1:59 pm
Carnut1, did Vizard do anything with the Pro-Filer Ford? Curious, we have a couple sets here.
I am not sure which Profiler you are asking about.
The 205cc Ford
I didn't see any at DV's shop. I did see that head at PRI and looks like it has excellent potential for power.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

Carnut1
Guru
Guru
Posts: 3923
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: Ported Ford 289 heads with port energy discussion

Post by Carnut1 » Sat Jun 16, 2018 2:21 pm

*, I am sure my sbc 355 cube work truck couldn't keep up to your blown ls Camaro. But I did manage to break the 14 bolt rear once!
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

Carnut1
Guru
Guru
Posts: 3923
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: Ported Ford 289 heads with port energy discussion

Post by Carnut1 » Wed Nov 07, 2018 1:21 pm

Thread bump. See Two heads are better than one power porting the E7TE heads thread for dyno work. Thanks, Charlie
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

Post Reply