Ported Ford 289 heads with port energy discussion

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
RevTheory
Guru
Guru
Posts: 4981
Joined: Thu Sep 04, 2014 6:45 am

Re: Ported Ford 289 heads with port energy discussion

Post by RevTheory » Sat Jun 16, 2018 12:09 pm

Carnut1 wrote:
Sat Jun 16, 2018 11:12 am
If you think I am a blind follower or easily bullshitted you have no idea who I am. Thanks, Charlie
Let it go, Charlie. He's only here to stir up shit and bash David. Those of us that know David know better.

Carnut1
Guru
Guru
Posts: 3916
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: Ported Ford 289 heads with port energy discussion

Post by Carnut1 » Sat Jun 16, 2018 12:34 pm

IMG_7595.jpg
No worries Rev, still waiting to see some of his work. This is 45 minutes of work with an EQ vortec I did at DV's shop for a flowbench, iop program demo. Put up or cap it. Charlie
You do not have the required permissions to view the files attached to this post.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

RevTheory
Guru
Guru
Posts: 4981
Joined: Thu Sep 04, 2014 6:45 am

Re: Ported Ford 289 heads with port energy discussion

Post by RevTheory » Sat Jun 16, 2018 12:36 pm

Damn, Charlie, I've sure enjoyed watching your work progress over the last few years and it's quite impressive. =D>

Edit: Is this what Marvin had on Facebook the last week or so?

Carnut1
Guru
Guru
Posts: 3916
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: Ported Ford 289 heads with port energy discussion

Post by Carnut1 » Sat Jun 16, 2018 12:51 pm

Yes, Marvin did the flowbench and photography work. Thanks, Charlie
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

Warp Speed
Guru
Guru
Posts: 2693
Joined: Wed Jun 25, 2008 1:46 pm
Location: NC

Re: Ported Ford 289 heads with port energy discussion

Post by Warp Speed » Sat Jun 16, 2018 1:48 pm

Awesome, but when is ANY of your stuff that you post, actually gonna run?

CGT
Guru
Guru
Posts: 1386
Joined: Sun May 10, 2009 12:29 pm

Re: Ported Ford 289 heads with port energy discussion

Post by CGT » Sat Jun 16, 2018 1:51 pm

Warp Speed wrote:
Sat Jun 16, 2018 1:48 pm
Awesome, but when is ANY of your stuff that you post, actually gonna run?
Ill go with never.
"You can't make any power with the valves closed!"
"Im out!"
"FACT! MOO IMO"

Carnut1
Guru
Guru
Posts: 3916
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: Ported Ford 289 heads with port energy discussion

Post by Carnut1 » Sat Jun 16, 2018 1:52 pm

I know Warp, so frustrating for me also. Life is so in the way of hot rodding! I need to set goals and get there.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

user-30563

Re: Ported Ford 289 heads with port energy discussion

Post by user-30563 » Sat Jun 16, 2018 1:59 pm

Carnut1, did Vizard do anything with the Pro-Filer Ford? Curious, we have a couple sets here.

Carnut1
Guru
Guru
Posts: 3916
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: Ported Ford 289 heads with port energy discussion

Post by Carnut1 » Sat Jun 16, 2018 2:05 pm

portinguy wrote:
Sat Jun 16, 2018 1:59 pm
Carnut1, did Vizard do anything with the Pro-Filer Ford? Curious, we have a couple sets here.
I am not sure which Profiler you are asking about.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

user-30563

Re: Ported Ford 289 heads with port energy discussion

Post by user-30563 » Sat Jun 16, 2018 2:10 pm

Carnut1 wrote:
Sat Jun 16, 2018 2:05 pm
portinguy wrote:
Sat Jun 16, 2018 1:59 pm
Carnut1, did Vizard do anything with the Pro-Filer Ford? Curious, we have a couple sets here.
I am not sure which Profiler you are asking about.
The 205cc Ford

https://www.profilerperformance.com/222 ... heads.html

Carnut1
Guru
Guru
Posts: 3916
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: Ported Ford 289 heads with port energy discussion

Post by Carnut1 » Sat Jun 16, 2018 2:15 pm

portinguy wrote:
Sat Jun 16, 2018 2:10 pm
Carnut1 wrote:
Sat Jun 16, 2018 2:05 pm
portinguy wrote:
Sat Jun 16, 2018 1:59 pm
Carnut1, did Vizard do anything with the Pro-Filer Ford? Curious, we have a couple sets here.
I am not sure which Profiler you are asking about.
The 205cc Ford
I didn't see any at DV's shop. I did see that head at PRI and looks like it has excellent potential for power.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

Carnut1
Guru
Guru
Posts: 3916
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: Ported Ford 289 heads with port energy discussion

Post by Carnut1 » Sat Jun 16, 2018 2:21 pm

*, I am sure my sbc 355 cube work truck couldn't keep up to your blown ls Camaro. But I did manage to break the 14 bolt rear once!
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

Carnut1
Guru
Guru
Posts: 3916
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: Ported Ford 289 heads with port energy discussion

Post by Carnut1 » Wed Nov 07, 2018 1:21 pm

Thread bump. See Two heads are better than one power porting the E7TE heads thread for dyno work. Thanks, Charlie
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

Post Reply