I am looking for a flowbench equipped with or able to be equipped with digital measurement. Does't have to be a big one, looking to baseline sub 3500 cfms heads only, not a head porter. Prefer single phase 220V or 120V
Would prefer a days drive from Omaha NE if a big one, or if able to readily ship, depends on the unit
Thanks in advance, if in the local area would buy and pick up today!
Wanted - Flowbench
Moderator: Team
-
- Expert
- Posts: 908
- Joined: Fri Sep 09, 2005 11:04 pm
- Location: Omaha, NE
- Contact:
Wanted - Flowbench
Bullock's Power Service, LLC
Plattsmouth, NE
70 Mustang, 489 FE, TKO-600, Massflo SEFI, 4.11s
71 F100 SB 4x4, 461 FE, 4 speed, port injected EFI, 3.50s
Plattsmouth, NE
70 Mustang, 489 FE, TKO-600, Massflo SEFI, 4.11s
71 F100 SB 4x4, 461 FE, 4 speed, port injected EFI, 3.50s