Anyone have opinions on either of these filter set-ups? I'm currently using an Oberg, which is great, but the in/out lines are to close to the headers. I'd like to get back to the bbc stock location, but still be able to use a re-usable.
Thanks
Ron
system 1 vs Trufilter
Moderator: Team
-
- Expert
- Posts: 708
- Joined: Sat Dec 22, 2007 11:42 pm
- Location: Maryland
i hooked up a system 1 on the pressure side of a dry sump chevy engine. didn't use it much before i sold the car. they are expensive and i think it was a replacement for the hp2 or 6 or something.
i had an oberg on the scavenge side and that is really the only one i ever checked.
so i guess i didn't have any issues with it. well constructed.
i had an oberg on the scavenge side and that is really the only one i ever checked.
so i guess i didn't have any issues with it. well constructed.
-
- Guru
- Posts: 1259
- Joined: Fri Jan 25, 2008 6:37 am
- Location: New Zealand
Use a lot of the System 1 filters from blown alcohol to performance street. They seem to work well and easy to look at & clean though not as easy as the oberg. but they have tons more surface area than the oberg.They are a little wider at the bottom as they taper slightly and they come in long & short.