Inexpensive 350 Build

[skinny z]

Next the rear suspension will have to be addressed.

Any details here you care to share?
I see a wheels up launch so there's something going on that's peaked my 3rd gen Camaro interest!

[vortecpro]

Next the rear suspension will have to be addressed.

Any details here you care to share?
I see a wheels up launch so there's something going on that's peaked my 3rd gen Camaro interest!

I want to put an anti roll on there. The differential isn't right, too tight, the front brakes drag, and a good trans would finish the project, then we would have something. But you know I like the car and the smooth idle, its a nice change, I think we got a decent back up race car when the other cars aren't running. I sure wished I would have run this 850 on my truck, it would have run 6s in the 1/8 th.

[Tom68]

Next the rear suspension will have to be addressed.

Any details here you care to share?
I see a wheels up launch so there's something going on that's peaked my 3rd gen Camaro interest!

I want to put an anti roll on there. The differential isn't right, too tight, the front brakes drag, and a good trans would finish the project, then we would have something. But you know I like the car and the smooth idle, its a nice change, I think we got a decent back up race car when the other cars aren't running. I sure wished I would have run this 850 on my truck, it would have run 6s in the 1/8 th.

It's not rolling now, or is it just not moving at all ?

[vortecpro]

Any details here you care to share?
I see a wheels up launch so there's something going on that's peaked my 3rd gen Camaro interest!

I want to put an anti roll on there. The differential isn't right, too tight, the front brakes drag, and a good trans would finish the project, then we would have something. But you know I like the car and the smooth idle, its a nice change, I think we got a decent back up race car when the other cars aren't running. I sure wished I would have run this 850 on my truck, it would have run 6s in the 1/8 th.

It's not rolling now, or is it just not moving at all ?

Don't understand your question

[Tom68]

I want to put an anti roll on there. The differential isn't right, too tight, the front brakes drag, and a good trans would finish the project, then we would have something. But you know I like the car and the smooth idle, its a nice change, I think we got a decent back up race car when the other cars aren't running. I sure wished I would have run this 850 on my truck, it would have run 6s in the 1/8 th.

It's not rolling now, or is it just not moving at all ?

Don't understand your question

Woops, not being a drag racer I thought you meant anti roll bar, you mean anti roll off the line I guess ?

[vortecpro]

It's not rolling now, or is it just not moving at all ?

Don't understand your question

Woops, not being a drag racer I thought you meant anti roll bar, you mean anti roll off the line I guess ?

I mean anti roll over my differential to stop body roll.

[Tom68]

Ok, well in the pics ( video may show a different story) the carvis coming up even. So something is already preventing roll.

[canuc]

Next the rear suspension will have to be addressed.

Any details here you care to share?
I see a wheels up launch so there's something going on that's peaked my 3rd gen Camaro interest!

I want to put an anti roll on there. The differential isn't right, too tight, the front brakes drag, and a good trans would finish the project, then we would have something. But you know I like the car and the smooth idle, its a nice change, I think we got a decent back up race car when the other cars aren't running. I sure wished I would have run this 850 on my truck, it would have run 6s in the 1/8 th.

is the truck ^^^ the square body shop truck ? 6's ?

[vortecpro]

Any details here you care to share?
I see a wheels up launch so there's something going on that's peaked my 3rd gen Camaro interest!

I want to put an anti roll on there. The differential isn't right, too tight, the front brakes drag, and a good trans would finish the project, then we would have something. But you know I like the car and the smooth idle, its a nice change, I think we got a decent back up race car when the other cars aren't running. I sure wished I would have run this 850 on my truck, it would have run 6s in the 1/8 th.

is the truck ^^^ the square body shop truck ? 6's ?

Yes, 1979 1/2 ton big 10.

[canuc]

cool , I should take a closer look at that build wasn't that one a 331 ? Your work seems to run well .

[vortecpro]

cool , I should take a closer look at that build wasn't that one a 331 ? Your work seems to run well .

Thank you, The first engine was a 331, the second engine was a 360 4.060 X 3.480.

331 made 440s HP the 360 made 536 HP.

[vortecpro]

NEW BEST at the slow track @ 1700 DA

1.43 60 foot
6.87 660 foot
10.89 @ 120.2xxx MPH

The fast track is .005 quicker and 1.2. MPH faster in the 660, that means high 10.70s @ 122 in 300-500 DA, couldn't be happier! Seem to be stuck @ 1.43 60 @ the slow track.

[1980RS]

NEW BEST at the slow track @ 1700 DA

1.43 60 foot
6.87 660 foot
10.89 @ 120.2xxx MPH

The fast track is .005 quicker and 1.2. MPH faster in the 660, that means high 10.70s @ 122 in 300-500 DA, couldn't be happier! Seem to be stuck @ 1.43 60 @ the slow track.

Great job Mark. The night I ran 10.90's with my 406 Vortec engine I had, my air was 2700ft.
1.48 60ft.
6.82 1/8 mile
10.92 in the 1/4 mile
Just didn't have the top end with the little cam I had in it at the time to run stronger on the big end, but I was not bitchin' one bit that night.