Professionally ported Big Chief heads and Profiler tunnel ram intake. Ported for big inch motor to make BIG power. Heads are bare. 55* valve job to fit 2.500" intake valve and 1.850" exhaust valve. 4.600" or bigger bore. Intake manifold is matched to a tall deck(10.200"). Comes with a twin dominator top plate and intake gaskets and Crane Cams Ultra-Pro .904", .220" offset lifters. Phone # (812)576-1088. Heads flow:
.200" 161 CFM
.300" 259
.400" 348
.500" 426
.600" 490
.700" 531
.800" 548
.900" 557
1.00" 565
New 14* BBC oval port Big Chief heads & intake
Moderator: Team
-
- New Member
- Posts: 2
- Joined: Sun Apr 13, 2008 1:39 pm
- Location:
-
- Expert
- Posts: 585
- Joined: Tue May 10, 2011 4:36 pm
- Location:
Re: New 14* BBC oval port Big Chief heads & intake
Who ported them,
JDE Heads & Manifolds
I'm WD with AFR,Edelbrock and many other parts and castings suppliers.
JDE has port programs In popular castings for performance uses, If you would like a port designed for your project contact me 704-658-6951
I'm WD with AFR,Edelbrock and many other parts and castings suppliers.
JDE has port programs In popular castings for performance uses, If you would like a port designed for your project contact me 704-658-6951
-
- New Member
- Posts: 2
- Joined: Sun Apr 13, 2008 1:39 pm
- Location: