3 INCH VS 3 1/2

Tech questions that don't fit above forums

Moderator: Team

Post Reply
moparian
Member
Member
Posts: 127
Joined: Thu Oct 01, 2009 1:03 am
Location: australia

3 INCH VS 3 1/2

Post by moparian »

I have been chasing some lost dyno hp, on a n/a 725 hp engine 750 on race gas, how much would a twin 3 inch with x pipe with 2 straight threw junk muffler then over the diff and 2 more small mufflers hold it back? , i am going to run it later in the year with pipes droped with collector extensions to see the difference.
Dan Timberlake
Guru
Guru
Posts: 1747
Joined: Tue Jan 15, 2013 8:10 pm
Location:

Re: 3 INCH VS 3 1/2

Post by Dan Timberlake »

There was an engine masters episode where they tested some systems with pretty big pipes, and slightly smaller pipes.
moparian
Member
Member
Posts: 127
Joined: Thu Oct 01, 2009 1:03 am
Location: australia

Re: 3 INCH VS 3 1/2

Post by moparian »

On enginge masters it was 454 bb chev 620 hp 580 ft open pipes the twin 2 1/2 robbed 20 hp and 25 ft lbs. but you chuck a extra 100-125 hp would the 3 inch choke it as much ?
Post Reply